Even if you take good care of your electric scooter and buy a high-quality model, it will eventually break down and require maintenance. Face it. You may expect a lot of wear and tear on your vehicle from regular use.
Of course, you may just drop it off at a repair shop and get it mended right away. However, doing so will drain your wallet of hard-earned cash. Self-care and upkeep is the more cost-effective option.
You will be able to fix issues with your electric scooter, such as a dead battery or a disconnected wire, if you are prepared with the necessary knowledge and tools. Aside from that, regular servicing may extend the life of your electric scooter. If you own an electric scooter, you'll want to read this article for maintenance tips.
Charge the battery often
A properly charged battery is essential for riding your scooter without having to constantly worry about the engine cutting off. The battery should be charged to full every few days or after each use.
If you do this, you won't have to spend hundreds of dollars replacing the battery any sooner than necessary.
There is a finite limit to the number of times you can charge any battery, from lithium-ion to sealed lead acid. When a battery is completely depleted and then charged back up to full capacity, this is considered one charging cycle.
Over time, the battery's capacity to retain a charge will deplete, reducing the scooter's range. Recharging the battery after each use will keep it working for years to come.Make sure your scooter is stored safely when not in use
Maintaining an electric scooter is best handled by avoiding problems as much as possible before they occur. To begin, you should look at where you're keeping your scooter and whether or not it's secure.
Select a spot that is shielded from the sun and has consistent temperatures. The battery's components can be harmed or worn out more quickly if stored in extreme temperatures.
Whether you ride it to and from work or around town for errands, keeping your scooter inside is a good idea. Corrosion and ordinary wear and tear can be reduced by keeping it protected from the environment in this way.Clean moving components and lubricate when necessary
Make sure to give your scooter a thorough cleaning once a week. Wipe the filth and dust from the stem and handlebars with a clean, moist cloth. Use lukewarm water and a little dish soap to clean the deck.
You can use a nylon-bristled scrub brush to remove ground-in dirt and muck, and then wash the area with warm water to remove any remaining residue. Use a toothbrush to get into the spaces between the wheel spokes and the hinges. Cleaning out the axles and spokes from any accumulated plant debris is a must. If you leave it on, it might cause your wheels to jam, sending you flying over the handlebars.
Avoid getting any moisture on the electronic parts. Be cautious if you must perform any maintenance or construction near such spots.
It is important to keep a dry microfiber cloth handy in case any of the parts get wet. Don't try to use the scooter again until you've made sure all the parts are dry.Check tyre pressure before you ride
Make it a routine to check the pressure of your scooter's tyres before each ride. If your tyres are properly inflated, you may go as fast as possible without putting too much strain on your engine.
You may complete the job with just a basic tyre gauge for your bike. To make sure your air pump is always providing the right amount of pressure, look for these features.
You should inspect your solid rubber wheels or those with solid rubber tubes for cracks or other problems. Check the rubber for any signs of dry rot or deterioration, such as cracks. If you see uneven tread wear on any of your tyres, it's time to get a replacement set.
The more enjoyable your scooter is to ride, the better wheels you should get.
A patch kit is a useful item to have on hand on rides. As a result, you may fix a flat tyre without having to delay the rest of your commute.Visually check cables and wires
When you're riding down the road on your E-scooter, you can always stop quickly and easily thanks to the specialised braking system. Cables are essential to the functioning of that braking system. It is possible to apply the brake by pulling the lever, which alters the cable tension and hence the brake's activation.
When the cables are in good shape, the brakes function as intended. Brakes lose effectiveness with age, fraying, corrosion, or damage. It's even possible for them to be wholly unsuccessful.
It's important to regularly check your wires for signs of damage. The cable's plastic sheathing should be whole and not peeling.
In addition to checking the brakes, you should also examine the throttle cable and housing.
Cables should be replaced if any damage is found on either the cables themselves or the casings they travel in. If you can afford to, you should have a professional handle this.Avoid rough weather conditions
Although your scooter can withstand rain and snow, you shouldn't use it to regularly wade through pools of water. The corrosion of your scooter's metal might be accelerated by the water that collects within the fenders and the joints. If you can help it, you should avoid riding in the rain or across large puddles. Even if you can't avoid getting wet, you should give your scooter a good drying off when you get there.
Keep a watch out for rusting on the metal parts if you frequently ride in rainy circumstances. If you see any rust forming, remove it with a rust remover that has been certified for use.Check your brakes regularly
Preventative care for your vehicle's braking system is crucial if you value your safety on the road. Brake pads, rotors, or discs should be inspected once a week.
If the parts are damaged or worn, you should get new ones. If you need to repair your vehicle's braking system, do your research to get the correct brand, model, and size of brake parts. Most e-bike parts are designed for larger wheels, so scooters cannot use them.
Consider the sensations you have as you squeeze the brake levers. They need to be pliable without being so floppy that they bang into the handlebar when the brake is completely applied.Book an inspection with professionals
This simple electric scooter maintenance checklist may not be sufficient if your scooter is your primary mode of transportation. A reliable mechanic should be contacted once a year for an inspection.
They may inspect the scooter for issues and fix them before they become major disasters. Better more, they will be able to diagnose problems immediately, allowing you to keep your scooter under warranty for as long as possible.
Summary
Riding a scooter down the street with the wind in your hair is one of life's greatest pleasures. Follow the steps in this tutorial to ensure that your electric scooter stays in top shape.
The longer and more frequently you are able to use your scooter due to your own self-care, the more you will enjoy it.
