Top Blogs On Home Improvement, Automotive & Health | Top Article Hub

From Home Improvement to Fashion, we've got you covered - one blog, all categories

How to Make a Backyard Putting Green

Artificial Grass Melbourne
It's simple to practice putting in your leisure time when you have a putting green in your backyard. A real green addition will cost a lot of money and require a lot of maintenance. Artificial grass, on the other hand, is easy to install and requires very little maintenance.


Even if you work hard, a real green in your backyard may pale in contrast to the ones you've seen on the golf course. But there is no harm in trying and getting ready for those perfect putting techniques in your backyard. It is easy to build your house into a lush green mini-golf course. Let us see how to build one.

  1. Select an appropriate site

    Greenery should be in an open part of your backyard that receives enough sunshine. Your future green should have plenty of airflows with no wind-blocking structures, plants or trees in the way. Low spots in your yard or regions with poor drainage should be avoided as well. But after you've discovered the perfect spot for your green, you should:
    • Consider the total size of your green. Take a piece of paper and sketch out the overall design, including desired measurements, after you've gotten a feel for the qualities of your soon-to-be putting green.
    • Not keep too many steep slopes and get sunlight and enough space for play. Then, take measurements and stake off the area where you want to put your putting green.
  2. Dig up your lawn

    You don't have to delve too far. Around ten inches will suffice. You're essentially digging out a shallow bathtub (a cake pan is another way to think of it) that covers your full green footprint. Before you cover it with grass, you'll need to fill it in with sand (and a few other things).

    The appropriate kind of soil is required for the turf of your green to thrive. The roots of your grass can grow in a variety of soils, but sandy loam soil is the best choice. Your turf will suffer severely if your soil contains a high proportion of clay, and it may not be able to develop well enough for you to putt. Unlike artificial turf, you have to take a lot of things into account. 
  3. Loosen the soil and remove debris

    You carry (or drag) the deep spader to the bed you want to work on and heave the tines into the dirt. As if you were getting on a pogo stick, grab the handle and stand on the bar to which the tines are attached. The tines will sink into the dirt as you rock the tool back and forth and side to side. You take a step backwards and pull the handle toward you when they won't go any further. 

    The spader will break up the subsoil as you peel it apart without exposing it to too much light or air. Repeat as necessary with the enormous forklifted out of the ground. Remove the debris so that your garden does not get any obstacles and it can grow healthy. 
  4. Add drainage

    Water should be able to drain swiftly and readily through the contours of your green-to-be; otherwise, your green may fail. Low spots where water can pool are also detrimental to your lawn's health. To keep the grass from becoming wet, establish several drainage paths.

    Installing drainage tiles beneath the surface of your green will help to improve drainage. It is recommended that you keep these near together with a maximum spacing distance of not more than 10 feet between them. This will help the green from getting damaged when wet. 
  5. Add a weed barrier

    Not only will an extra degree of separation keep your putting green weed-free, but it will also prevent your yard from becoming infested with Bentgrass or Bermuda. Using a plastic barrier to protect your green from your yard and your yard from your green is a good way to go.
  6. Cap the area off with sand

    The easiest type to build for your first try at making your putting green is mostly level. Low patches can degrade the condition of your grass, so use your rake to disperse the dirt evenly.
    Keep a yard of sand to the side to fill in any low patches, animal tracks or other unanticipated alterations to your green.
  7. Seed or sod the green

    Mix part of your seed with sand before scattering it to give it more protection. If you have a bird problem, this can help. But if you find birds eating a lot of your seed, you may want to distribute more. A pound of seed should cover approximately 2,000 square feet in theory, though this can vary depending on the type of grass you choose.
  8. Insert the putting cup

    If you are a golf enthusiast, you can create a hole somewhat larger than a golf ball with your bulb planter where you think your putting hole should be. This is simply a rough sketch of your green's layout; you'll sculpt the hole and insert the putting cup later.

    When you grow your grass or decide to make your backyard green and use the actual grass instead of synthetic grass, the above steps need to be taken. This way, you can turn your backyard into a mini-golf or vegetation ground. So happy gardening! 

    You can also read Benefits of Artificial Turf